Sony has released firmware 2.01 for the Sony BURANO 8K Digital Motion Picture Camera, which can be downloaded here.
The Release Notes are below:
Sony is offering a system firmware update for Digital Motion Picture Camera BURANO “MPC-2610″.
Sony highly recommends this firmware update for immediate installation on all BURANO systems to ensure highest performance.
To add a new function and to improve the performance of BURANO, the updated software is released. (V2.01)
Note: UpdateGuide and ReleaseNotes are included in the zipped download file with main firmware module.
Applicable model Digital Motion Picture Camera BURANO “MPC-2610″.
Applicable system software version
The applicable products have system firmware version “Ver.1.10” or earlier.
After updating, the system firmware version will be “Ver.2.01”.
[Contents of V2.0]
IMPORTANT: Installation of firmware is at owner’s risk – please refer to our terms & conditions for details. Prior to installation always read installation instructions.
- New Recording Formats
-
- FFcrop 3.8K 16:9, up to 120fps
- S35 4.3K 4:3 aspect imager scan mode, for anamorphic shooting, up to 60fps
- S35 1.9K 16:9 up to 240fps
NOTE: When 240fps is selected for S35 1.9K 16:9, SDI output and HDMI outputs are not available.
- Addition of 1.8x setting to De-squeeze function for anamorphic lenses
- Addition of 24.00p to X-OCN 16:9 imager scan modes
- Additional exposure tools (High/Low key)
- Support for Active/High Image stabilization in FF crop 6K, S35 1.9K 16:9
- Addition of S&Q selection increments : 66, 72, 75, 88, 90, 96, 110fps
- Expansion of White Balance memory positions from 3 to 8
- Inclusion of VF Gamma Display Assist while using S-Log3 for monitoring
- [Monitor FHD] is newly added as a factory preset for SDI output for both X-OCN and XAVC
- Improved the on-screen display which places camera status information outside of the image in [Monitor FHD] in both HDMI and SDI output
- Addition of breathing compensation and image stabilization metadata in X-OCN
- Time Code and Clip Name metadata are now overlaid to [Monitor FHD]
- Support for 23.98PsF for SDI output
- Image quality is improved in S-Log3 external output in Base Look
- 709tone is newly added as a preset Base Look
- Improved image quality when applying user 3D LUTs
- Compatible with commands for PL lenses supporting Cooke/i Technology
- Focus & Zoom: Can be controlled on the BURANO, from M&C app or via external devices
- Iris: Can be controlled from Remote Control Panel only
- 24V option is added to PL mount voltage setting (PL-Mt Voltage)
- Autofocus improvement when recording with 29.97P, 25P, 24P, and 23.98P
- Proxy recording is now available with system frequency of 24P
- Factory-reset frequency is changed from 59.94P to 23.98P
- In addition to Reset/Reset without Network, [Reset to Factory Defaults] menu is now available to initialize all settings e.g. password, User 3D LUTs in memory
- ・Variable ND control is now possible from Remote Control Panel (RCP)
- “Imager Temperature” is added to the status screen (Information screen)
- “Format Media” can be executed from the status screen (Media screen)
- Camera ID and Reel # can be set in the status screen (Project screen)
- Tally control is now possible from external devices connected via wired-LAN
Follow SonyAddict on Facebook, Twitter, Instagram, and YouTube
Plus our owners’ groups
Sony a1 Owners Group
Sony a9 Owners Group
Sony a7 Owners Group
