Sony FX9 Firmware Update 2.10 Released

Sony FX9: B&H Photo / Amazon / Adorama

Sony released a firmware update for the Sony FX9, which you can download here

[Applicable model]
Solid State Memory Camcorder  “PXW-FX9”, “PXW-FX9K“ and Extension Unit for FX9 camera “XDCA-FX9“.

[Applicable system software version]
Ver.2.01 or earlier
(Please visit the download page to check the system software version installed on your product.)
After updating, the system software version will be “Ver.2.10”.

The installation/upgrading procedure manual is included in the zipped download file with main firmware module.

[Contents of update]
Refer to the Release Notes for details.
– 3840×2160 RAW output support up to 120fps
– White Balance adjustment improvement

[IMPORTANT]: Installation of firmware is at owner’s risk – please refer to our terms & conditions for details. Prior to installation always read installation instructions.

Major Functions Updated in Version 2.1
3840×2160 RAW output support

Support for 3840×2160 has been added to RAW Output Format for the RAW output function that is enabled when an XDCA-FX9 (option) is attached to the camcorder.

This can be selected when Imager Scan Mode is set to S35 4K and Codec is set to RAW. Also, when RAW Output Format is set to 3840×2160, Slow & Quick Motion can be enabled with the frame rate set to 100P or 120P.

White Balance adjustment improvement

The White Balance adjustment in sunlight has been made easier, and can also be adjusted to a more natural color.

This entry was posted in Video and tagged , . Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • FCC disclosure statement: this post may contain affiliate links or promotions that do not cost readers anything but help keep this website alive. As an Amazon Associate I earn from qualifying purchases. Thanks for your support!