New Compact LightPix Lab FlashQ x20 For Sony Cameras



You can get the new compact LightPix Lab FlashQ x20 from B&H Photo and Amazon

The compact, lightweight FlashQ x20 with Transmitter for Sony from LightPix Labs is a cost-efficient, Sony ADI / P-TTL-compatible lighting solution with advanced triggering and control features. The lightweight, compact flash easily fits into tight places where larger units can’t go. With a guide number of 65, the FlashQ x20 has TTL power selection and runs on two alkaline or rechargeable NiMH batteries, and it will recycle quickly depending on the batteries in use.

One of the flash’s clever features is the removeable Sony TTL transmitter that comes with the unit. By detaching the transmitter and mounting the flash head remotely on a light stand, you can adjust power and trigger it from the on-camera transmitter at a distance. In fact, the transmitter can control several x20s simultaneously. Features include 1st and 2nd curtain sync and flash exposure compensation. Perks include a built-in filter holder and tilting capability. Finally, a pleasant surprise is FlashQ x20’s LED light, which can be used as a modeling light, or with its high CRI of 95, used as a video light.

Sony Camera Compatibility

a7, a7 II, a7 III, a7R II, a7R III, a7R IV, a7s, a7s II, a7s III, a7C, a6000, a6300, a6400, a6500, RX1, RX1R, RX1 R II, RX10, RX10 II, RX10 III, RX10 IV

Benefits

  • Guide number 65.62′ / 20m (ISO 100 @ 32mm)
  • Compatible with Sony ADI / P-TTL
  • Front and rear curtain sync
  • Wireless TTL, off-camera flash any time with detachable transmitter
  • Remote control power ratio, video light level
  • Flash exposure compensation
  • Tiltable flash head
  • Built-in color gel holder
  • LED video light with adjustable color and brightness
  • FlashQ Transmitter with built-in rechargeable Li-Ion battery
  • USB charger for transmitter and x20 flash (using optional NiMH batteries)

Remote Triggering Power Level Adjustment

The x20 functions like a typical on-camera flash while attached to the included shoe-mount FlashQ transmitter. Detaching the flash puts it into wireless, mode allowing it to be used off-camera. Wireless triggering and power level adjustment can then be accomplished via the camera-mounted transmitter

Power

The x20 runs on two AA alkaline batteries or two rechargeable Ni-MH batteries. The transmitter can be conveniently charged via USB

LED Video / Modeling Light

The x20 features an LED light for use as a modeling light or with its CRI of 95, used as a video light

Follow SonyAddict on FacebookTwitterInstagram, and YouTube

Plus our owners’ groups

Sony a9 Owners Group

Sony a7 Owners Group