Godox X1T-S Firmware V16 and X1R-S Firmware V05 Now Available

• 6 years ago

Godox X1T-S Firmware V16 for Sony was released with a few updates included:

1. To make a compensation to the TTL output value at large aperture setting.

2. To add Fn-10 in custom function settings. When setting as 01, the AF-assist function can be used on Interchangeable Lens Digital Camera (some cameras e.g. A9, A7, etc.).

3. To solve the problem that the ISO will change to 819200 from 100 when A7RM2 camera is using the high-speed continuous shooting in M mode.

4. To add Fn-11 in custom function settings, so that the customer can set RFID.

X1R-S

1. The customer can set RF ID. Operation: press the CH and GR button simultaneously and power it on to enter the RF ID setting interface. Short or long press the CH button to add the ID value while short or long press the GR button to decrease. Power off the flash trigger after 5s, and ID value can be set and saved. Then, power it on, and the ID value will affect RF reception.

You can download them here

Godox X1T-S: B&H Photo / Amazon / Adorama

Godox X1R-S: B&H Photo / Amazon

Godox V860IIS: B&H Photo / Amazon

Godox TT685S: B&H Photo / Amazon

Godox TT350S: B&H Photo / Amazon